1300 522 725 sales@crealt.com.au
Select Page

Eracheck Pro


ERACHECK PRO is the industry leading measurement device for CFC-free and reliable oil-in-water or oil-in-soil testing. The only fully ASTM D7678 compliant analyzer on the market, combines all benefits of the withdrawn IR method ASTM D3921 with the advantages of CFC-free solvents. It measures sub-ppm concentrations of Total Petroleum Hydrocarbons (TPH) and Total Oil and Grease (TOG) in water and soil.



ASTM D7678

Correlation to

ASTM D3921
ASTM D4281
ASTM D7066
DIN 38409-H18
DIN 38409-H53
EN 14039
EPA 1664B
EPA 9071B
ISO 16703
ISO 9377-2
ISO 9377-2 (MOD) OSPAR
ASTM D8193

Quantum Cascade Laser Technology

ERACHECK PRO is the first and only measurement instrument on the market that uses the latest Quantum Cascade Laser (QCL) technology to measure liquid samples. This measurement technique is covered by international patents held by eralytics and our partner QuantaRed Technologies GmbH, allowing a major step in easy-to-use, precise and environmental friendly oil-in-water testing.

Unique Measurement Precision

ERACHECK PRO shows a linear behavior over the broad measurement range of 0.1 to 2000 mg/l during oil-in-water testing. At the low end of the concentration ranges ERACHECK PRO offers a repeatability of 0.1mg/l and at the high end it still delivers a repeatability as good as 0.1%. ERACHECK PRO also perfectly correlates to gas chromatography (e.g. ISO 9377-2 (mod) OSPAR), gravimetric (e.g. EPA 1664A) and infrared (e.g. ASTM D7066) oil-in-water testing methods.

Measurement Procedure

  • Perform the sample extraction: Typically 900ml water sample are extracted with 50ml cyclohexane
  • Select the calibration to use
  • Enter sample ID, water and cyclohexane volumes and the operator ID
  • Chose if you are using the cartridges
  • Press the RUN button
  • Run a background measurement
  • Run a sample measurement

You are guided through the whole procedure by instructions on the screen. The measurement procedure is visualized on the screen and after the measurement the result is displayed. The extraction parameters for the oil-in-water testing can be adjusted to your needs.


ERACHECK Feature Video

  • Latest laser technology (QCL) for highest precision
  • Patented measurement principle for oil-in-water testing
  • Use of an environmental friendly and low cost extraction solvent instead of CFCs
  • Fast & easy measurement of low concentration of oil-in-water or oil-in-soil
  • Excellent correlation to a wide range of international standards
  • Usable for a wide range of applications

Operation Video
Watch this video to get an overview on the sample handling and measurement procedure of ERACHECK during oil-in-water testing.

Use of ERACHECK to Determine Reduction of Spilled Diesel

In this video by Directa Puls SpA the ERACHECK is used to determine the water quality of before a diesel spill and after the diesel spill is cleaned up by Basic G+ (a super-expanded, accordion-like graphitic product).

As it can be seen in the video, ERACHECK is able to measure an aqueous hydrocarbon content in the range of 0.2 mg/l.

Resources & Downloads

Eracheck Pro Enquiry 

For more information or to arrange a call from one of the Cea Analytical Team, please complete the contact form below.  If your enquiry is urgent, please call us on 1300 552 725.

Eracheck Pro Enquiry








NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731