1300 522 725 sales@crealt.com.au
Select Page
KYOWA

Kyowa Interface Science instrumentation provides qualitative and quantitative analysis of various characteristic properties required in coating processes. Interfacial phenomena such as ‘Wettability’, ‘Adhesion’, ‘Surface Tension’, ‘Dispersion’ and ‘Emulsion’ are often overlooked in daily life however they play a vital role in adding value to products where customer experience can be enhanced, or make life better or easier.

Used to great effect in an array of rapidly evolving industries such as semiconductor, nanotechnology and flat panel displays where the evaluation of surface tension and wettability is a critical factor of quality improvement, Interfacial analysis plays an important role.

CONTACT ANGLE METER
DMe-211

The DMe-211 is an economical yet fully-featured contact angle meter with a computer image analysis system.

DMs-401

The DMs-401 is a compact yet high-performance surface measuring instrument for the measurement of static and dynamic contact angles, surface free energy of solids and surface and interfacial tension of liquids.

DMo-Series

The four models of the DMo Series are high-performance contact angle meters, only differing in their grade of automation.

DMo-WA

The three models of the DMo-WA series are specially designed contact angle meters for measurements of disk-shaped substrates such as silicon wafer with a diameter of up to 300mm.

PCA-11

The portable contact angle meter PCA11 is a compact and lightweight device for fully automated on-site measurements of contact angle, surface tension and surface free energy of solids.

MCA-4

The MCA-4 utilizes a precise electric micro-injector system and a high-quality optical system for accurate contact angle measurements of micro-droplets on small surface areas of only 100 x 100µm.

FPD-CP11

The FPD-CP11 system consists of the main measuring head, a metering pump and a control box. Developed for non-contact measurements of contact angles on flat panel displays such as LCD, LED, OLED and silicon wafer.

SURFACE TENSIOMETER
DMe-211

The DMe-211 is an economical yet fully-featured contact angle meter with a computer image analysis system.

DMs-401

The DMs-401 is a compact yet high-performance surface measuring instrument for the measurement of static and dynamic contact angles, surface free energy of solids and surface and interfacial tension of liquids.

DMo Series

The four models of the DMo Series are high-performance contact angle meters, only differing in their grade of automation.

Friction Analyzer

A Friction Analyzer or Friction Tester measures the resistance, or friction force, of two objects, which slide against each other.

Peel Analyzer

Pressure-sensitive adhesive tapes play a significant role in the production of flat panel displays, semiconductors, optical instruments, solar batteries, automobiles and medical treatments.

Special Instruments

Most oils have the characteristic to spread uniformly on the water surface as a monomolecular film or monolayer if the area is large enough for the oils to spread freely.

NATIONAL OFFICE

EMAIL

sales@crealt.com.au

accounts@crealt.com.au

service@crealt.com.au

GET SOCIAL

PHONE

NSW: +61 2 4320 6672

VIC: +61 3 9017 4496

QLD: +61 7 3333 2171

WA: +61 8 6465 4576

NZ: +64 212 372 731

CONTACT US